MTL3014 SWITCH/ PROXIMITY DETECTOR RELAY dual outputs. Brand new hot sale in stock with 1 year warranty 100% New&Original

The MTL3014 enables two safe-area loads to be controlled by a single proximity detector or switch located in a hazardous area. It is

ideal for applications where the switch status is to be fed to two separate systems, such as control and logging or control and

shutdown installations. The unit – a dual-output version of the MTL3011 – features two isolated relay outputs. Relay A reflects the

status of the hazardous-area sensor, and relay B is selected by aswitch in the top of the unit to operate either in parallel with relay A,

or independently to provide a line-fault output when the connections to the sensor go open or short circuit. The status of each relay is indicated by an LED in the top of the unit, and an additional terminal block is fitted on the safe-area side of the unit to accommodate the connections from the two sets of relay contacts. The output phase of relay A (and relay B when ‘slave’ mode is selected) can be reversed by a link to allow an alarm condition (output open) to be signalled for either state of the sensor. The outputs cannot be used as if they were changeover contacts from a relay.

MTL3000 series

Product CodeDescription

MTL3011   Switch/proximity detector relay - volt-free contacts

MTL3012   Switch/proximity detector relay - solid state 

MTL3013   Switch/proximity detector relay - 2-channel 

MTL3014   Switch/proximity detector relay - dual outputs

MTL3021_22  Solenoid/alarm driver ~ IIC loop powered

MTL3041   Repeater power supply - 4/20mA for 2-wire transmitters 

MTL3042   DC isolator - 4/20mA loop powered for I/P converters

MTL3043   DC isolator - 1/40mA for fire and smoke detctors

MTL3045   Isolating driver - 4/20mA for I/P converters 

MTL3046B  Repeater power supply - for ‘smart’ transmitters

MTL3052   Digital isolator - for signals up to 10kHz

MTL3054   Communications isolator/ repeater

MTL3058_59  Serial data interface ~ RS232 general purpose

MTL3071   Temperature converter ~ THC or emf input

MTL3072   Temperature converter ~ 3-wire RTD input

MTL3073   Temperature converter ~ THC or RTD input

MTL3081   Millivolt isolator - for low-level inputs

MTL3099   Dummy isolator - for terminating and isolating unused cores 

MTL3992   High stability power supply